Skip to content
Home » Franklin electric subdrive 20 manual model number 5870205303

Franklin electric subdrive 20 manual model number 5870205303

  • by

Franklin electric subdrive 20 manual model number 5870205303
28/12/2009 · Went into the garage and immediately saw the red “fault” light flashing on my Subdrive 150. It’s flashing red 5 times. I turned off the circuit, let it degenerize, flipped the circuit back on, same thing. Consulted the owners manual for what the 5 light flashes meant, it says open ciruit. I checked the well head, as well as all other wiring that isn’t underground. I found nothing wrong. I also
09/10/2017 · In today’s video, we are going to cover troubleshooting a franklin electric QD submersible well pump control box. We are going to share with you some money saving tips …
Table 1: SubDrive Models Model Name Part Number Use with Motor Series SubDrive300 5870206300 (NEMA 4) 234 317 xxxx (5. Page 4. Description and Features The Franklin Electric SubDrive300 is a dependable residential and light commercial water system controller that uses advanced electronics to enhance the performance of standard submersible pumps
Franklin Electric SubDrive 20 NEMA3R: Looking for a Lower Cost, Fully Interchangeable, American Made with Menu, Plug and Play, 2HP Controller Kit with Pressure Switch? (NEMA 3R for indoor/outdoor use) Click Here VS20 Controller Kit Complete with Pressure Switch Questions??? 866-960-9621 David Franklin Electric
Using variable speed technology, SubDrive and MonoDrive continuously monitor water demand and adjust the speed of your pump to provide the water you need without pressure fluctuations. Franklin Electric Subdrive and Monodrive Features Smooth, quiet operation Choice of pressure settings Built-in pumping system protection
Control panels by Franklin Electric are rigorously tested to ensure a robust product. Standard features of a Franklin control panel include the following: Rugged UL approved, heavy-duty NEMA 3R housing enclosure with a door wind hinge. Manually operated push-to-start switch, lightning arrestor, pilot device and alarm terminal block.
Ninguna Categoria; SubDrive15/20/30 MonoDrive, MonoDriveXT. Anuncio
Model Number Search. Enter the model, or item number below to search for a specific product. More. Service AIM Manual Technical Support 1-800-348-2420 Field Service Engineers. Training FranklinTECH Schedule Mobile Training Facilities Become a Certified Contractor FranklinTECH Online. News & Events Latest News Upcoming Events Sign Up For Frankly Speaking. Resources Promotional Merchandise

Founded in 1944, Franklin Electric has grown from a small motor manufacturing company into a leading global provider of complete water systems and fueling sy…
is available through pump manufacturers and distributors, or directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use SubDrive/MonoDrive only with Franklin Electric 4-inch submersible motors as specified in this manual (see Table 2, pg. 19). Use of this unit with any other Franklin Electric motor or with motors from
Franklin Electric offers a full line of pumping systems to serve a wide variety of clean water applications. The Americas Water Systems group serves North and South America.
Buy Franklin Electric 5870301113 Direct. Free Shipping. Check the Franklin Electric SubDrive SolarPAK Controller ratings before checking out.
franklin electric 2009 aim manual submersible motors application † installation † maintenance 60 hz, single-phase and three-phase motors . attention! important information for installers of this equipment! this equipment is intended for installation by technically qualified personnel. failure to install it in compliance with national and local electrical codes, and within franklin electric
This recall involves the Pumptec electronic motor controller for 115v/230v submersible motors rated 1/3 to 1½ HP Model No. 5800020600 with date codes of 06F45 through 09L45. The model number and date code can be found on the nameplate label located on the right-hand side of the enclosure. Sold at:
Notes: Refer to Franklin Electric’s SubDrive/MonoDrive Installation Manual. (A) Operating temperature is specified at full output power when installed as described in Controller Location Selection. (B) Refer to detailed Mounting Dimensions. (C) If a pump other than the …
SubDrive QuickPAK is Franklin’s popular system solution package, designed to simplify the installation of a constant pressure system. Item Being Discontinued, See Replacement: Franklin Electric 93805254 20SDQP-1.5HP SubDrive 75 QuickPAK 20 GPM NEMA 3. Franklin Electric SubDrive …
Franklin Electric SubDrive 2 Wire Pump Constant Pressure Controller The SubDrive 2W is part of Franklin Electric’s family of constant pressure controllers. SubDrive controllers provide constant pressure by continually monitoring and adjusting the pump speed to meet water supply demands.

Franklin Electric Submersible & Jet Pump Control Boxes


2009 AIM MANUAL fs.fed.us

SubDrive/MonoDrive How it Works The Franklin Electric SubDrive/MonoDrive is designed to be part of a system that consists of only four components: A. Standard Pump and Franklin Electric Motor B. SubDrive/MonoDrive Controller C. Small Pressure Tank (see Table 4, pg. 24) D. Franklin Electric Pressure Sensor (provided)
Franklin Electric 93805435 10SDQP-2.0HP SubDrive 20 QuickPAK 10 GPM NEMA 3R. Price: ,306.54 Quantity: +- Franklin Electric SubDrive QuickPAK Included Components Franklin pump Franklin motor NEMA 3R SubDrive variable frequency controller Pressure sensor Franklin Electric SubDrive QuickPAK Applications Residential Water Systems City-like water pressure Smaller tank saves space Landscape
Franklin Electric Subdrive and Monodrive Description Constant pressure systems are changing the standard for private well systems all over the country. A private water well is one of the best sources of water for your home, but just as in municipal…
FRANKLIN ELECTRIC PUMP CONTROL BOXES Franklin Electric submersible control boxes are designed and optimized specifically for Franklin three-wire, single-phase motors rated 1/3 to 15 hp. Control boxes are an integral part of a submersible motor power system and rigorous component testing ensures the most robust products in the industry.


Model Search. Enter the model, or item number below to search for a specific product. More. News & Events News Fairs & Events Newsletter Sign-up Newsletter Unsubscribe. Service Franklin Electric – Service Shops Field Service Engineers Franklin AID Sign-up Franklin AID Franklin AID Unsubscribe. Training FranklinTECH Schedule. Reference Resource Library. Who We Are About Us Environmental …
Franklin Electric 93802030, Submersible Well Pump & Motor With Control, Model 20SDQP-2.0HP, SubDrive 100, QuickPAK, 20 GPM, NEMA 1, 2 HP, 230 Volt, …
Encapsulated Submersible Motors Franklin Electric’s 100 mm, 150 mm & 200 mm encapsulated motors are manufactured to ISO 9001 standards, and are the quality drive for submersible… SubDrive Solar The SubDrive solar pumping system uses existing Franklin Electric components to produce a rugged, high-output system for use in remote and harsh…


directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use the SubDrive Duplex Alternator only with Franklin Electric SubDrive units as specified in this manual (see Table 1). Use of this unit with Variable Frequency Drives (VFDs) from other manufacturers may result in damage to both sets of electronics.
SubDrive QuickPAK The SubDrive and MonoDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system. This all-in-one package comes available with an extended warranty for the pump, motor, …
27/11/2011 · I have had a Franklin Electric Subdrive 75 Well Pump System for approximately 6 months. It has been working perfectly until now. For the past 3 days the water has stopped after a 5 minute shower. I checked the gauge on the tank and it was reading 15 (normally around 60). There were no red fault lights. The green light was solid. About 15
Franklin Electric Pressure Sensor Kit for Constant Pressure Systems: MonoDrive, MonoDriveXT, SubDrive2W, SubDrive75, SubDrive100, and SubDrive150 – Part # 22399…

Home North America Water Franklin Electric

Constant pressure controllers by Franklin Electric offer a number of convenient benefits that make them the best choice for regulating water pressure in your home: Adjustable settings from 20-85 psi. Compatible with both small-pressure (two gallon minimum) and larger, pre-installed tanks. Can be used with any brand of pump and motor.
22/12/2017 · Franklin Electric was a big presence at the recent 2017 Groundwater Week in Nashville. National Driller interviewed Jeff Frank, senior product manager, about the new VFD and the company’s
Franklin’s technical service hotline is made up of real people, offering real answers, in real time. Serving professional water systems distributors and contractors, our hotline boasts decades of collective industry experience. For answers to your water systems questions, contact our hotline by phone or email. Give us a call at 800.348.2420, or an email to…
SubDrive and MonoDrive, Franklin Electric’s constant pressure controllers, cover ratings all the way from ½ to 5 horsepower, but they all use the same component to measure water pressure. We call it the SubDrive/MonoDrive pressure sensor. In this issue of Franklin AID, we’ll give you a better understanding of how this rugged device works. To…
NOTE: Franklin Electric products are standard stock items for us. Get Franklin Electric Constant Pressure Systems like the MonoDrive series, standard control boxes, motors, well pumps submersible or jet and their parts direct to your door. Our water technicians can assist you all the way through the process.
Products – SubDrive Family. Franklin Electric SubDrive constant pressure systems are used in homes all over the country. Whether you have city water or a private well, Franklin constant pressure systems are available in a variety of models so you are sure to find one suited for your needs.
Franklin Electric QuickPAK Replacement Pump End Description This product is pump only replacement for Franklin Electric QuickPAK packaged systems Franklin Electric 93873510 35SD1S4-PE QuickPAK Replacement Pump End 1.0HP 35GPM Fits: 93805274 35SDQP-1.5HP SubDrive …
Franklin Electric South Africa. Franklin Electric is the leading manufacturer of world-class pumping system solutions providing the highest quality, availability, service, innovation and value-for-money in the industry. Backed by unsurpassed expertise throughout Africa, these leading brands are ideal for various pumping applications. Our Products

Franklin Electric Control Panels

12/10/2017 · Full troubleshooting guide can be found in the Franklin Electric AIM Manual: https://www.rcworst.com/Shared/conten… Chris shows you how to troubleshoot a Franklin
Franklin Electric Control Boxes Franklin Electric control boxes were manufactured to work with 3-wire Franklin submersible motors from 1 to 15 horsepower. If the water system uses level switches, standard or heavy-duty switches, or other pilot devices, these control boxes are ideal. Optimized to specifically work Franklin submersible pump
Franklin Electric SubDrive controllers are 1 phase input for residential applications. The SubDrive then converts power to 3 phase variable frequency output. Franklin Electric SubDrive controllers were designed to work in conjunction with submersible pumps that are driven by a Franklin Electric 3 phase 230 volt submersible motor. The SubDrive delivers constant water pressure with a wide range
SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.
SubDrive 1100, SubDrive 75, SubDrive 150 and SubDrive 300 comply with Category C2 limit requirements of AS/NZS61800-3.2005, adjustable speed electrical power drive systems. Part 3: EMC requirements and specific test methods. SubDrive 1100, SubDrive 75, SubDrive 150 and SubDrive 300 are categorized as a C2 devices, rated
The SubDrive and MonoDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system. This all-in-one package comes available with an extended warranty for the pump, motor, and drive, and features durable NEMA 3R enclosures for added security. n Motor, pump, and drive all in one package n Selection based on flow and total dynamic head n
is available through pump manufacturers and distributors, or directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use SubDrive/MonoDrive only with Franklin Electric 4-inch submersible motors as specified in this manual (see Table 1, pg. 4). Use of this unit with any other Franklin Electric motor or with motors from
It’s very simple. SD75 combines a ¾ Hp pump with a 1½ Hp Franklin motor. To select the pump, choose the 1½ Hp pump curve that meets your flow and pressure requirements from any manufacturer’s pump catalog, just like you normally do. But, within this pump family choose the ¾ Hp wet end instead of the 1½ Hp model.

AIM Manual Page 66 – Franklin Electric


Hotline Franklin AID

Home Franklin Electric Europe


Subdrive 150 flashing red fault light. Terry Love

Franklin 5870206300 Water Pump User Manual

SubDrive15/20/30 MonoDrive MonoDriveXT Franklin Electric

Franklin Electric Submersible Pumps Control Boxes & Motors

Franklin Electric Pressure Sensor Kit › Constant Systems


SUBDRIVE & MONODRIVE NEMA 3R QUICKPAK

Franklin Electric Sub Drive 75 Constant Pressure system

SubDrive20 (NEMA-3R) (Indoor/Outdoor Protection) WWPP
Franklin Electric Products > Constant Pressure Drives

Founded in 1944, Franklin Electric has grown from a small motor manufacturing company into a leading global provider of complete water systems and fueling sy…
Buy Franklin Electric 5870301113 Direct. Free Shipping. Check the Franklin Electric SubDrive SolarPAK Controller ratings before checking out.
This recall involves the Pumptec electronic motor controller for 115v/230v submersible motors rated 1/3 to 1½ HP Model No. 5800020600 with date codes of 06F45 through 09L45. The model number and date code can be found on the nameplate label located on the right-hand side of the enclosure. Sold at:
Model Search. Enter the model, or item number below to search for a specific product. More. News & Events News Fairs & Events Newsletter Sign-up Newsletter Unsubscribe. Service Franklin Electric – Service Shops Field Service Engineers Franklin AID Sign-up Franklin AID Franklin AID Unsubscribe. Training FranklinTECH Schedule. Reference Resource Library. Who We Are About Us Environmental …
SubDrive and MonoDrive, Franklin Electric’s constant pressure controllers, cover ratings all the way from ½ to 5 horsepower, but they all use the same component to measure water pressure. We call it the SubDrive/MonoDrive pressure sensor. In this issue of Franklin AID, we’ll give you a better understanding of how this rugged device works. To…

Franklin Electric 5870301113 SubDrive SolarPAK Controller
Franklin Electric Discusses New SubDrive Utility VFD YouTube

Franklin’s technical service hotline is made up of real people, offering real answers, in real time. Serving professional water systems distributors and contractors, our hotline boasts decades of collective industry experience. For answers to your water systems questions, contact our hotline by phone or email. Give us a call at 800.348.2420, or an email to…
Franklin Electric QuickPAK Replacement Pump End Description This product is pump only replacement for Franklin Electric QuickPAK packaged systems Franklin Electric 93873510 35SD1S4-PE QuickPAK Replacement Pump End 1.0HP 35GPM Fits: 93805274 35SDQP-1.5HP SubDrive …
Franklin Electric SubDrive controllers are 1 phase input for residential applications. The SubDrive then converts power to 3 phase variable frequency output. Franklin Electric SubDrive controllers were designed to work in conjunction with submersible pumps that are driven by a Franklin Electric 3 phase 230 volt submersible motor. The SubDrive delivers constant water pressure with a wide range
Table 1: SubDrive Models Model Name Part Number Use with Motor Series SubDrive300 5870206300 (NEMA 4) 234 317 xxxx (5. Page 4. Description and Features The Franklin Electric SubDrive300 is a dependable residential and light commercial water system controller that uses advanced electronics to enhance the performance of standard submersible pumps
franklin electric 2009 aim manual submersible motors application † installation † maintenance 60 hz, single-phase and three-phase motors . attention! important information for installers of this equipment! this equipment is intended for installation by technically qualified personnel. failure to install it in compliance with national and local electrical codes, and within franklin electric
Model Number Search. Enter the model, or item number below to search for a specific product. More. Service AIM Manual Technical Support 1-800-348-2420 Field Service Engineers. Training FranklinTECH Schedule Mobile Training Facilities Become a Certified Contractor FranklinTECH Online. News & Events Latest News Upcoming Events Sign Up For Frankly Speaking. Resources Promotional Merchandise
Constant pressure controllers by Franklin Electric offer a number of convenient benefits that make them the best choice for regulating water pressure in your home: Adjustable settings from 20-85 psi. Compatible with both small-pressure (two gallon minimum) and larger, pre-installed tanks. Can be used with any brand of pump and motor.
Ninguna Categoria; SubDrive15/20/30 MonoDrive, MonoDriveXT. Anuncio
SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.
This recall involves the Pumptec electronic motor controller for 115v/230v submersible motors rated 1/3 to 1½ HP Model No. 5800020600 with date codes of 06F45 through 09L45. The model number and date code can be found on the nameplate label located on the right-hand side of the enclosure. Sold at:

0.5 HP Franklin Electric Submersible Well Pump Motor
How to Troubleshoot a QD Control Box YouTube

directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use the SubDrive Duplex Alternator only with Franklin Electric SubDrive units as specified in this manual (see Table 1). Use of this unit with Variable Frequency Drives (VFDs) from other manufacturers may result in damage to both sets of electronics.
Buy Franklin Electric 5870301113 Direct. Free Shipping. Check the Franklin Electric SubDrive SolarPAK Controller ratings before checking out.
Control panels by Franklin Electric are rigorously tested to ensure a robust product. Standard features of a Franklin control panel include the following: Rugged UL approved, heavy-duty NEMA 3R housing enclosure with a door wind hinge. Manually operated push-to-start switch, lightning arrestor, pilot device and alarm terminal block.
Franklin Electric Control Boxes Franklin Electric control boxes were manufactured to work with 3-wire Franklin submersible motors from 1 to 15 horsepower. If the water system uses level switches, standard or heavy-duty switches, or other pilot devices, these control boxes are ideal. Optimized to specifically work Franklin submersible pump
Franklin Electric 93805435 10SDQP-2.0HP SubDrive 20 QuickPAK 10 GPM NEMA 3R. Price: ,306.54 Quantity: – Franklin Electric SubDrive QuickPAK Included Components Franklin pump Franklin motor NEMA 3R SubDrive variable frequency controller Pressure sensor Franklin Electric SubDrive QuickPAK Applications Residential Water Systems City-like water pressure Smaller tank saves space Landscape
Products – SubDrive Family. Franklin Electric SubDrive constant pressure systems are used in homes all over the country. Whether you have city water or a private well, Franklin constant pressure systems are available in a variety of models so you are sure to find one suited for your needs.
Franklin Electric SubDrive controllers are 1 phase input for residential applications. The SubDrive then converts power to 3 phase variable frequency output. Franklin Electric SubDrive controllers were designed to work in conjunction with submersible pumps that are driven by a Franklin Electric 3 phase 230 volt submersible motor. The SubDrive delivers constant water pressure with a wide range
Franklin Electric offers a full line of pumping systems to serve a wide variety of clean water applications. The Americas Water Systems group serves North and South America.
Franklin Electric South Africa. Franklin Electric is the leading manufacturer of world-class pumping system solutions providing the highest quality, availability, service, innovation and value-for-money in the industry. Backed by unsurpassed expertise throughout Africa, these leading brands are ideal for various pumping applications. Our Products
12/10/2017 · Full troubleshooting guide can be found in the Franklin Electric AIM Manual: https://www.rcworst.com/Shared/conten… Chris shows you how to troubleshoot a Franklin
Franklin Electric Subdrive and Monodrive Description Constant pressure systems are changing the standard for private well systems all over the country. A private water well is one of the best sources of water for your home, but just as in municipal…
Model Number Search. Enter the model, or item number below to search for a specific product. More. Service AIM Manual Technical Support 1-800-348-2420 Field Service Engineers. Training FranklinTECH Schedule Mobile Training Facilities Become a Certified Contractor FranklinTECH Online. News & Events Latest News Upcoming Events Sign Up For Frankly Speaking. Resources Promotional Merchandise
Franklin Electric Pressure Sensor Kit for Constant Pressure Systems: MonoDrive, MonoDriveXT, SubDrive2W, SubDrive75, SubDrive100, and SubDrive150 – Part # 22399…
SubDrive QuickPAK The SubDrive and MonoDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system. This all-in-one package comes available with an extended warranty for the pump, motor, …

How to Troubleshoot Franklin Electric Control Boxes (1.5
SubDrive QuickPAK Franklin Electric

is available through pump manufacturers and distributors, or directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use SubDrive/MonoDrive only with Franklin Electric 4-inch submersible motors as specified in this manual (see Table 1, pg. 4). Use of this unit with any other Franklin Electric motor or with motors from
Model Search. Enter the model, or item number below to search for a specific product. More. News & Events News Fairs & Events Newsletter Sign-up Newsletter Unsubscribe. Service Franklin Electric – Service Shops Field Service Engineers Franklin AID Sign-up Franklin AID Franklin AID Unsubscribe. Training FranklinTECH Schedule. Reference Resource Library. Who We Are About Us Environmental …
Model Number Search. Enter the model, or item number below to search for a specific product. More. Service AIM Manual Technical Support 1-800-348-2420 Field Service Engineers. Training FranklinTECH Schedule Mobile Training Facilities Become a Certified Contractor FranklinTECH Online. News & Events Latest News Upcoming Events Sign Up For Frankly Speaking. Resources Promotional Merchandise
Franklin Electric SubDrive 20 NEMA3R: Looking for a Lower Cost, Fully Interchangeable, American Made with Menu, Plug and Play, 2HP Controller Kit with Pressure Switch? (NEMA 3R for indoor/outdoor use) Click Here VS20 Controller Kit Complete with Pressure Switch Questions??? 866-960-9621 David Franklin Electric
28/12/2009 · Went into the garage and immediately saw the red “fault” light flashing on my Subdrive 150. It’s flashing red 5 times. I turned off the circuit, let it degenerize, flipped the circuit back on, same thing. Consulted the owners manual for what the 5 light flashes meant, it says open ciruit. I checked the well head, as well as all other wiring that isn’t underground. I found nothing wrong. I also
SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.
Ninguna Categoria; SubDrive15/20/30 MonoDrive, MonoDriveXT. Anuncio
Franklin Electric SubDrive controllers are 1 phase input for residential applications. The SubDrive then converts power to 3 phase variable frequency output. Franklin Electric SubDrive controllers were designed to work in conjunction with submersible pumps that are driven by a Franklin Electric 3 phase 230 volt submersible motor. The SubDrive delivers constant water pressure with a wide range

0.5 HP Franklin Electric Submersible Well Pump Motor
Franklin Electric Control Panels

SubDrive 1100, SubDrive 75, SubDrive 150 and SubDrive 300 comply with Category C2 limit requirements of AS/NZS61800-3.2005, adjustable speed electrical power drive systems. Part 3: EMC requirements and specific test methods. SubDrive 1100, SubDrive 75, SubDrive 150 and SubDrive 300 are categorized as a C2 devices, rated
The SubDrive and MonoDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system. This all-in-one package comes available with an extended warranty for the pump, motor, and drive, and features durable NEMA 3R enclosures for added security. n Motor, pump, and drive all in one package n Selection based on flow and total dynamic head n
09/10/2017 · In today’s video, we are going to cover troubleshooting a franklin electric QD submersible well pump control box. We are going to share with you some money saving tips …
Franklin Electric QuickPAK Replacement Pump End Description This product is pump only replacement for Franklin Electric QuickPAK packaged systems Franklin Electric 93873510 35SD1S4-PE QuickPAK Replacement Pump End 1.0HP 35GPM Fits: 93805274 35SDQP-1.5HP SubDrive …
Model Number Search. Enter the model, or item number below to search for a specific product. More. Service AIM Manual Technical Support 1-800-348-2420 Field Service Engineers. Training FranklinTECH Schedule Mobile Training Facilities Become a Certified Contractor FranklinTECH Online. News & Events Latest News Upcoming Events Sign Up For Frankly Speaking. Resources Promotional Merchandise
SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.
Notes: Refer to Franklin Electric’s SubDrive/MonoDrive Installation Manual. (A) Operating temperature is specified at full output power when installed as described in Controller Location Selection. (B) Refer to detailed Mounting Dimensions. (C) If a pump other than the …
Franklin’s technical service hotline is made up of real people, offering real answers, in real time. Serving professional water systems distributors and contractors, our hotline boasts decades of collective industry experience. For answers to your water systems questions, contact our hotline by phone or email. Give us a call at 800.348.2420, or an email to…

Franklin Electric S.A. Products
0.5 HP Franklin Electric Submersible Well Pump Motor

It’s very simple. SD75 combines a ¾ Hp pump with a 1½ Hp Franklin motor. To select the pump, choose the 1½ Hp pump curve that meets your flow and pressure requirements from any manufacturer’s pump catalog, just like you normally do. But, within this pump family choose the ¾ Hp wet end instead of the 1½ Hp model.
Franklin Electric 93805435 10SDQP-2.0HP SubDrive 20 QuickPAK 10 GPM NEMA 3R. Price: ,306.54 Quantity: – Franklin Electric SubDrive QuickPAK Included Components Franklin pump Franklin motor NEMA 3R SubDrive variable frequency controller Pressure sensor Franklin Electric SubDrive QuickPAK Applications Residential Water Systems City-like water pressure Smaller tank saves space Landscape
Franklin Electric SubDrive 2 Wire Pump Constant Pressure Controller The SubDrive 2W is part of Franklin Electric’s family of constant pressure controllers. SubDrive controllers provide constant pressure by continually monitoring and adjusting the pump speed to meet water supply demands.
This recall involves the Pumptec electronic motor controller for 115v/230v submersible motors rated 1/3 to 1½ HP Model No. 5800020600 with date codes of 06F45 through 09L45. The model number and date code can be found on the nameplate label located on the right-hand side of the enclosure. Sold at:
Franklin Electric SubDrive controllers are 1 phase input for residential applications. The SubDrive then converts power to 3 phase variable frequency output. Franklin Electric SubDrive controllers were designed to work in conjunction with submersible pumps that are driven by a Franklin Electric 3 phase 230 volt submersible motor. The SubDrive delivers constant water pressure with a wide range
Franklin Electric Pressure Sensor Kit for Constant Pressure Systems: MonoDrive, MonoDriveXT, SubDrive2W, SubDrive75, SubDrive100, and SubDrive150 – Part # 22399…
Franklin Electric 93802030, Submersible Well Pump & Motor With Control, Model 20SDQP-2.0HP, SubDrive 100, QuickPAK, 20 GPM, NEMA 1, 2 HP, 230 Volt, …
Buy Franklin Electric 5870301113 Direct. Free Shipping. Check the Franklin Electric SubDrive SolarPAK Controller ratings before checking out.
directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use the SubDrive Duplex Alternator only with Franklin Electric SubDrive units as specified in this manual (see Table 1). Use of this unit with Variable Frequency Drives (VFDs) from other manufacturers may result in damage to both sets of electronics.

SubDrive QuickPAK Franklin Electric
Home Franklin Electric Europe

FRANKLIN ELECTRIC PUMP CONTROL BOXES Franklin Electric submersible control boxes are designed and optimized specifically for Franklin three-wire, single-phase motors rated 1/3 to 15 hp. Control boxes are an integral part of a submersible motor power system and rigorous component testing ensures the most robust products in the industry.
22/12/2017 · Franklin Electric was a big presence at the recent 2017 Groundwater Week in Nashville. National Driller interviewed Jeff Frank, senior product manager, about the new VFD and the company’s
SubDrive QuickPAK is Franklin’s popular system solution package, designed to simplify the installation of a constant pressure system. Item Being Discontinued, See Replacement: Franklin Electric 93805254 20SDQP-1.5HP SubDrive 75 QuickPAK 20 GPM NEMA 3. Franklin Electric SubDrive …
SubDrive QuickPAK The SubDrive and MonoDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system. This all-in-one package comes available with an extended warranty for the pump, motor, …
Franklin Electric South Africa. Franklin Electric is the leading manufacturer of world-class pumping system solutions providing the highest quality, availability, service, innovation and value-for-money in the industry. Backed by unsurpassed expertise throughout Africa, these leading brands are ideal for various pumping applications. Our Products

Franklin Electric 93802030 Submersible Well Pump & Motor
Franklin Electric S.A. Products

Franklin Electric SubDrive 2 Wire Pump Constant Pressure Controller The SubDrive 2W is part of Franklin Electric’s family of constant pressure controllers. SubDrive controllers provide constant pressure by continually monitoring and adjusting the pump speed to meet water supply demands.
SubDrive QuickPAK The SubDrive and MonoDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system. This all-in-one package comes available with an extended warranty for the pump, motor, …
Control panels by Franklin Electric are rigorously tested to ensure a robust product. Standard features of a Franklin control panel include the following: Rugged UL approved, heavy-duty NEMA 3R housing enclosure with a door wind hinge. Manually operated push-to-start switch, lightning arrestor, pilot device and alarm terminal block.
Franklin Electric Pressure Sensor Kit for Constant Pressure Systems: MonoDrive, MonoDriveXT, SubDrive2W, SubDrive75, SubDrive100, and SubDrive150 – Part # 22399…
Franklin Electric Control Boxes Franklin Electric control boxes were manufactured to work with 3-wire Franklin submersible motors from 1 to 15 horsepower. If the water system uses level switches, standard or heavy-duty switches, or other pilot devices, these control boxes are ideal. Optimized to specifically work Franklin submersible pump
SubDrive QuickPAK is Franklin’s popular system solution package, designed to simplify the installation of a constant pressure system. Item Being Discontinued, See Replacement: Franklin Electric 93805254 20SDQP-1.5HP SubDrive 75 QuickPAK 20 GPM NEMA 3. Franklin Electric SubDrive …
SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.
Franklin Electric QuickPAK Replacement Pump End Description This product is pump only replacement for Franklin Electric QuickPAK packaged systems Franklin Electric 93873510 35SD1S4-PE QuickPAK Replacement Pump End 1.0HP 35GPM Fits: 93805274 35SDQP-1.5HP SubDrive …
SubDrive and MonoDrive, Franklin Electric’s constant pressure controllers, cover ratings all the way from ½ to 5 horsepower, but they all use the same component to measure water pressure. We call it the SubDrive/MonoDrive pressure sensor. In this issue of Franklin AID, we’ll give you a better understanding of how this rugged device works. To…
Table 1: SubDrive Models Model Name Part Number Use with Motor Series SubDrive300 5870206300 (NEMA 4) 234 317 xxxx (5. Page 4. Description and Features The Franklin Electric SubDrive300 is a dependable residential and light commercial water system controller that uses advanced electronics to enhance the performance of standard submersible pumps
This recall involves the Pumptec electronic motor controller for 115v/230v submersible motors rated 1/3 to 1½ HP Model No. 5800020600 with date codes of 06F45 through 09L45. The model number and date code can be found on the nameplate label located on the right-hand side of the enclosure. Sold at:
Products – SubDrive Family. Franklin Electric SubDrive constant pressure systems are used in homes all over the country. Whether you have city water or a private well, Franklin constant pressure systems are available in a variety of models so you are sure to find one suited for your needs.

SubDrive15/20/30 MonoDrive MonoDriveXT
SubDrive15/20/30 MonoDrive MonoDriveXT Franklin Electric

Franklin Electric 93802030, Submersible Well Pump & Motor With Control, Model 20SDQP-2.0HP, SubDrive 100, QuickPAK, 20 GPM, NEMA 1, 2 HP, 230 Volt, …
Franklin Electric Pressure Sensor Kit for Constant Pressure Systems: MonoDrive, MonoDriveXT, SubDrive2W, SubDrive75, SubDrive100, and SubDrive150 – Part # 22399…
SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.
Franklin Electric Subdrive and Monodrive Description Constant pressure systems are changing the standard for private well systems all over the country. A private water well is one of the best sources of water for your home, but just as in municipal…

Franklin Electric Submersible & Jet Pump Control Boxes
SUBDRIVE & MONODRIVE NEMA 3R QUICKPAK

28/12/2009 · Went into the garage and immediately saw the red “fault” light flashing on my Subdrive 150. It’s flashing red 5 times. I turned off the circuit, let it degenerize, flipped the circuit back on, same thing. Consulted the owners manual for what the 5 light flashes meant, it says open ciruit. I checked the well head, as well as all other wiring that isn’t underground. I found nothing wrong. I also
Control panels by Franklin Electric are rigorously tested to ensure a robust product. Standard features of a Franklin control panel include the following: Rugged UL approved, heavy-duty NEMA 3R housing enclosure with a door wind hinge. Manually operated push-to-start switch, lightning arrestor, pilot device and alarm terminal block.
is available through pump manufacturers and distributors, or directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use SubDrive/MonoDrive only with Franklin Electric 4-inch submersible motors as specified in this manual (see Table 2, pg. 19). Use of this unit with any other Franklin Electric motor or with motors from
NOTE: Franklin Electric products are standard stock items for us. Get Franklin Electric Constant Pressure Systems like the MonoDrive series, standard control boxes, motors, well pumps submersible or jet and their parts direct to your door. Our water technicians can assist you all the way through the process.
Franklin Electric 93802030, Submersible Well Pump & Motor With Control, Model 20SDQP-2.0HP, SubDrive 100, QuickPAK, 20 GPM, NEMA 1, 2 HP, 230 Volt, …
SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.
Notes: Refer to Franklin Electric’s SubDrive/MonoDrive Installation Manual. (A) Operating temperature is specified at full output power when installed as described in Controller Location Selection. (B) Refer to detailed Mounting Dimensions. (C) If a pump other than the …
SubDrive/MonoDrive How it Works The Franklin Electric SubDrive/MonoDrive is designed to be part of a system that consists of only four components: A. Standard Pump and Franklin Electric Motor B. SubDrive/MonoDrive Controller C. Small Pressure Tank (see Table 4, pg. 24) D. Franklin Electric Pressure Sensor (provided)
12/10/2017 · Full troubleshooting guide can be found in the Franklin Electric AIM Manual: https://www.rcworst.com/Shared/conten… Chris shows you how to troubleshoot a Franklin

SubDrive QuickPAK Franklin Electric
SubDrive Duplex Alternator Amazon S3

Franklin Electric Pressure Sensor Kit for Constant Pressure Systems: MonoDrive, MonoDriveXT, SubDrive2W, SubDrive75, SubDrive100, and SubDrive150 – Part # 22399…
Model Search. Enter the model, or item number below to search for a specific product. More. News & Events News Fairs & Events Newsletter Sign-up Newsletter Unsubscribe. Service Franklin Electric – Service Shops Field Service Engineers Franklin AID Sign-up Franklin AID Franklin AID Unsubscribe. Training FranklinTECH Schedule. Reference Resource Library. Who We Are About Us Environmental …
Table 1: SubDrive Models Model Name Part Number Use with Motor Series SubDrive300 5870206300 (NEMA 4) 234 317 xxxx (5. Page 4. Description and Features The Franklin Electric SubDrive300 is a dependable residential and light commercial water system controller that uses advanced electronics to enhance the performance of standard submersible pumps
is available through pump manufacturers and distributors, or directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use SubDrive/MonoDrive only with Franklin Electric 4-inch submersible motors as specified in this manual (see Table 1, pg. 4). Use of this unit with any other Franklin Electric motor or with motors from
Constant pressure controllers by Franklin Electric offer a number of convenient benefits that make them the best choice for regulating water pressure in your home: Adjustable settings from 20-85 psi. Compatible with both small-pressure (two gallon minimum) and larger, pre-installed tanks. Can be used with any brand of pump and motor.
FRANKLIN ELECTRIC PUMP CONTROL BOXES Franklin Electric submersible control boxes are designed and optimized specifically for Franklin three-wire, single-phase motors rated 1/3 to 15 hp. Control boxes are an integral part of a submersible motor power system and rigorous component testing ensures the most robust products in the industry.
Using variable speed technology, SubDrive and MonoDrive continuously monitor water demand and adjust the speed of your pump to provide the water you need without pressure fluctuations. Franklin Electric Subdrive and Monodrive Features Smooth, quiet operation Choice of pressure settings Built-in pumping system protection
Franklin Electric Subdrive and Monodrive Description Constant pressure systems are changing the standard for private well systems all over the country. A private water well is one of the best sources of water for your home, but just as in municipal…
is available through pump manufacturers and distributors, or directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use SubDrive/MonoDrive only with Franklin Electric 4-inch submersible motors as specified in this manual (see Table 2, pg. 19). Use of this unit with any other Franklin Electric motor or with motors from
Control panels by Franklin Electric are rigorously tested to ensure a robust product. Standard features of a Franklin control panel include the following: Rugged UL approved, heavy-duty NEMA 3R housing enclosure with a door wind hinge. Manually operated push-to-start switch, lightning arrestor, pilot device and alarm terminal block.

SubDrive75/100/150/300/2W MonoDrive Franklin Electric
SUBDRIVE & MONODRIVE NEMA 3R QUICKPAK

SubDrive QuickPAK The SubDrive and MonoDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system. This all-in-one package comes available with an extended warranty for the pump, motor, …
Franklin’s technical service hotline is made up of real people, offering real answers, in real time. Serving professional water systems distributors and contractors, our hotline boasts decades of collective industry experience. For answers to your water systems questions, contact our hotline by phone or email. Give us a call at 800.348.2420, or an email to…
27/11/2011 · I have had a Franklin Electric Subdrive 75 Well Pump System for approximately 6 months. It has been working perfectly until now. For the past 3 days the water has stopped after a 5 minute shower. I checked the gauge on the tank and it was reading 15 (normally around 60). There were no red fault lights. The green light was solid. About 15
Franklin Electric Subdrive and Monodrive Description Constant pressure systems are changing the standard for private well systems all over the country. A private water well is one of the best sources of water for your home, but just as in municipal…
is available through pump manufacturers and distributors, or directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use SubDrive/MonoDrive only with Franklin Electric 4-inch submersible motors as specified in this manual (see Table 1, pg. 4). Use of this unit with any other Franklin Electric motor or with motors from
Model Search. Enter the model, or item number below to search for a specific product. More. News & Events News Fairs & Events Newsletter Sign-up Newsletter Unsubscribe. Service Franklin Electric – Service Shops Field Service Engineers Franklin AID Sign-up Franklin AID Franklin AID Unsubscribe. Training FranklinTECH Schedule. Reference Resource Library. Who We Are About Us Environmental …
SubDrive and MonoDrive, Franklin Electric’s constant pressure controllers, cover ratings all the way from ½ to 5 horsepower, but they all use the same component to measure water pressure. We call it the SubDrive/MonoDrive pressure sensor. In this issue of Franklin AID, we’ll give you a better understanding of how this rugged device works. To…
SubDrive/MonoDrive How it Works The Franklin Electric SubDrive/MonoDrive is designed to be part of a system that consists of only four components: A. Standard Pump and Franklin Electric Motor B. SubDrive/MonoDrive Controller C. Small Pressure Tank (see Table 4, pg. 24) D. Franklin Electric Pressure Sensor (provided)
22/12/2017 · Franklin Electric was a big presence at the recent 2017 Groundwater Week in Nashville. National Driller interviewed Jeff Frank, senior product manager, about the new VFD and the company’s
Franklin Electric QuickPAK Replacement Pump End Description This product is pump only replacement for Franklin Electric QuickPAK packaged systems Franklin Electric 93873510 35SD1S4-PE QuickPAK Replacement Pump End 1.0HP 35GPM Fits: 93805274 35SDQP-1.5HP SubDrive …
is available through pump manufacturers and distributors, or directly from Franklin Electric at our toll-free number 1-800-348-2420. s! CAUTION Use SubDrive/MonoDrive only with Franklin Electric 4-inch submersible motors as specified in this manual (see Table 2, pg. 19). Use of this unit with any other Franklin Electric motor or with motors from
Ninguna Categoria; SubDrive15/20/30 MonoDrive, MonoDriveXT. Anuncio
Franklin Electric Pressure Sensor Kit for Constant Pressure Systems: MonoDrive, MonoDriveXT, SubDrive2W, SubDrive75, SubDrive100, and SubDrive150 – Part # 22399…
Encapsulated Submersible Motors Franklin Electric’s 100 mm, 150 mm & 200 mm encapsulated motors are manufactured to ISO 9001 standards, and are the quality drive for submersible… SubDrive Solar The SubDrive solar pumping system uses existing Franklin Electric components to produce a rugged, high-output system for use in remote and harsh…
SubDrive QuickPAK is Franklin’s popular system solution package, designed to simplify the installation of a constant pressure system. Item Being Discontinued, See Replacement: Franklin Electric 93805254 20SDQP-1.5HP SubDrive 75 QuickPAK 20 GPM NEMA 3. Franklin Electric SubDrive …

10 thoughts on “Franklin electric subdrive 20 manual model number 5870205303”

  1. Franklin Electric offers a full line of pumping systems to serve a wide variety of clean water applications. The Americas Water Systems group serves North and South America.

    Franklin Electric S.A. Home

  2. SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.

    Franklin Electric 5870301113 SubDrive SolarPAK Controller
    CONSTANT PRESSURE CONTROLLERS R.C. Worst
    SUBDRIVE & MONODRIVE NEMA 3R QUICKPAK

  3. The SubDrive and MonoDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system. This all-in-one package comes available with an extended warranty for the pump, motor, and drive, and features durable NEMA 3R enclosures for added security. n Motor, pump, and drive all in one package n Selection based on flow and total dynamic head n

    Franklin Electric Pressure Sensor Kit › Constant Systems

  4. SubDrive 75: YOU made it better! Posted on January 13, 2002 by copywriterfele Franklin Electric has always been pleased to offer you quality, state-of-the-art electronic products for all types of submersible pumping systems, including constant pressure systems.

    Franklin Electric Franklin Electric 93873510 35SD1S4-PE
    AIM Manual Page 66 – Franklin Electric

  5. This recall involves the Pumptec electronic motor controller for 115v/230v submersible motors rated 1/3 to 1½ HP Model No. 5800020600 with date codes of 06F45 through 09L45. The model number and date code can be found on the nameplate label located on the right-hand side of the enclosure. Sold at:

    Franklin SubDrive75 Constant Pressure Controller Nema 1
    Franklin Electric Sub Drive 75 Constant Pressure system
    Franklin Electric Franklin Electric 5870203380 SubDrive

  6. franklin electric 2009 aim manual submersible motors application † installation † maintenance 60 hz, single-phase and three-phase motors . attention! important information for installers of this equipment! this equipment is intended for installation by technically qualified personnel. failure to install it in compliance with national and local electrical codes, and within franklin electric

    0.5 HP Franklin Electric Submersible Well Pump Motor
    Franklin Electric Products > Constant Pressure Drives
    Franklin Electric Submersible & Jet Pump Control Boxes

  7. SubDrive and MonoDrive, Franklin Electric’s constant pressure controllers, cover ratings all the way from ½ to 5 horsepower, but they all use the same component to measure water pressure. We call it the SubDrive/MonoDrive pressure sensor. In this issue of Franklin AID, we’ll give you a better understanding of how this rugged device works. To…

    SubDrive15/20/30 MonoDrive MonoDriveXT Franklin Electric
    Franklin Electric Pressure Sensor Kit › Constant Systems

  8. Products – SubDrive Family. Franklin Electric SubDrive constant pressure systems are used in homes all over the country. Whether you have city water or a private well, Franklin constant pressure systems are available in a variety of models so you are sure to find one suited for your needs.

    Franklin Electric S.A. Products
    Franklin Electric Discusses New SubDrive Utility VFD YouTube
    Franklin Electric Submersible & Jet Pump Control Boxes

  9. Franklin Electric SubDrive 2 Wire Pump Constant Pressure Controller The SubDrive 2W is part of Franklin Electric’s family of constant pressure controllers. SubDrive controllers provide constant pressure by continually monitoring and adjusting the pump speed to meet water supply demands.

    Pumptec Recall Franklin Electric

  10. Control panels by Franklin Electric are rigorously tested to ensure a robust product. Standard features of a Franklin control panel include the following: Rugged UL approved, heavy-duty NEMA 3R housing enclosure with a door wind hinge. Manually operated push-to-start switch, lightning arrestor, pilot device and alarm terminal block.

    Franklin Electric Pressure Sensor Kit › Constant Systems

Comments are closed.